Placement Of Charge Block; Robot Charging - ECOVACS ECO D62 Instruction Manual

Placement of charge block

Robot Charging

ENG - 124
Put the block at an even place and make the base perpendicular
to the ground. Meanwhile, take a look at the marked electricity
voltage to make sure the product is used under instruction.
Tangle the power cord on the pothook and do not scatter it besi-
des the block or hold it under the base, in case that robot would
get impeded when it turns back to charging block.
There should not be any object at least 1.5 meter in front of
the charging block. Besides, anything with strong reflector is not
supposed to stay ahead of the infrared receiver. For example,
ground glass, smooth ceramic vase and so on. Other wise,
the machine shall not detect the charging block.
Depending on the room size and the number of pieces of furniture
in the room, it may take a while for the Robot to find the Charger
Dock. If you find this to be happening, you may want to reloca-
te the Charger Dock to a new spot to see if the Robot can find it
easier.
Please do not put the charging block to the staircase to avoid
accidental cases.
• Before charging, please turn ON the robot by pressing
button . (0 OFF 1 ON.)
• Before using for the first time, charge the Robot for a mini-
mum of 12 hours. Run the Robot until it wants to seek the Char-
ger Dock to recharge. Do this for 2 or 3 times to achieve the best
performance for the battery. When charging, the indicator flashes;
when battery is fully charged, the indicator stays solid.
• Robot should be charged under normal temperature. A war-
mer or cooler room may require a longer charging time, or even
break the batteries.
Tips:
► While the Robot is charging in the Charger Dock, the Battery
Icon will blink. Once the Robot's battery is fully charged, he Batte-
ry indicator will extinct.
► Make sure the robot is turned ON when charging.
► Please keep the robot stay in charging dock when it is fully
charged to achieve best cleaning efficiency. When it finished char-
ging, it will automatically switch to a lower current.
► If Robot has NOT been used for a long time, please firstly
charge its battery three times repeatedly for three minutes. Then
charge the robot for 3-5 hours for next use.