Lcd Display D66; Battery Charging; Installation Of Charging Dock - ECOVACS ECO D62 Instruction Manual

LCD display D66

1 Battery charge status
2 Dust box full
3 Dust box missing
4 Agitator brush not working
5 One or both driving wheels not on floor
6 On/Pause key
7 Mode selection key
8 Pause status
9 Spot mode
10 Back to charge mode
11 Edge mode

4. BATTERY CHARGING

Installation of Charging Dock

12 Intensive mode
13 Auto mode
14 Working status
15 Cleaning schedule on HOLD
16 Cleaning schedule Every Day
17 Cleaning schedule Current Day
18 Time adjust key
19 Schedule programmed cleaning
20 Current time in 24 hour mode
21 24 hour time display
Take out the top lid and base of charging dock from the packaging.
Then connect top lid and base, and the installation of charging
dock is completed if „ click" sound is heard.
Push the release button on the back to lock the top lid. You may
push the button again should you have the need to take the top
portion off the base.
Connect the Charger Dock with power.
ENG
Enjoy smarter life
ENG - 123