How To Fix The Media Firmly; Installing Media Holder Plates - MUTOH VJ-1624 Operation Manual

4 Handling the printer
b. Press the [Enter] key on the operation panel.
• "Micro Change: 0.00%" is displayed on the operation panel.
c. Press the [+] key or [–] key and enter the micro adjustment value according to the printing result
in Step 7.
d. Press the [Enter] key on the operation panel.
• The micro adjustment value is saved.
• "PF5:Micro Change" is displayed on the operation panel.
10. Press the [Menu] key on the operation panel.
• The operation panel returns to Normal.
• The adjustment of media feed compensation value is complete.
4.2.6.2

How to fix the media firmly

1. Load the roll media to the printer.
3.4.2 Setting Roll Media
2. Lower the media loading lever.
No.
1
3. Adjust the Media feed compensation value again.
4.2.6.1 Procedure for the media feed compensation value
4.2.7

Installing media holder plates

Variations in quality and use conditions can cause the edges of the media to curl, resulting in damage to
the media by the print head surface.
To prevent this, use the media holder plates to reduce the amount of curling in the media.
Follow the procedure below to install the media holder plates.
Media loading lever
VJ-1624 OPERATION MANUAL
Name
4-14
1