Setting The Ringing Melody And Volume - Swisscom Top A47 ISDN Operating Instructions Manual

Additional settings

Setting the ringing melody and volume

You can set the melody and volume of the ring for individual users.
Select the user.
Press the menu button until »Settings« is displayed.
Press the softkey repeatedly under »
tone«.
Press the softkey under »change« until the display shows »Melody 1:«. The
change
melody is played.
Press the softkey under » « to display and play other melodies.
Once you have decided on a melody, press the softkey under »ok«. The display
ok
then shows »Volume«.
Set the volume by pressing the softkey under » « for lower and » « for
higher.
Press the softkey under »ok« to confirm your selection. From now on your
ok
phone will ring with this melody for the set user.
To exit this menu, hold down the EXIT button.
The volume can also be set to »0«. In this case you hear no ringing melody, the symbol
»Ringing tone off«
The LED flashes to indicate an incoming call.
is displayed and the LED is lit.
63
« until the display shows »Ringing