Swisscom Top A47 ISDN Operating Instructions Manual page 52

Phonebook
Suppress number or enter EAC
The first line of the display shows »No.:« and the cursor, and underneath »ok,
Attributes«. You have not yet entered any phone number.
Press the softkey under »Attributes«.
Attributes
Press the softkey button under » « until the attribute you wish to enter is
showed.
Press the softkey button under the attribute you wish to enter.
EAC »EAC«:
»Suppress No.«:
Suppress No.
Press the softkey to access the next attribute.
You can define the exchange access code in the »PBX« menu (see »PBX operation«). The
exchange access code is inserted only when the phone is connected to a PBX.
Continue entering numbers
Enter the number of the exchange with area code.
Press the softkey under »ok«. Your number is stored and the display shows the
ok
name entered and user code, and underneath »new, change, del,
The display shows »Reaction:« with the setting »none«. Press the softkey under
ok
»ok«.
Or...
If you do not wish to make another entry, hold down the EXIT button.
Or...
To enter another number, press the softkey under »new« and proceed as de-
new
scribed above.
Or...
To edit an existing entry, press the softkey under »change« and proceed as de-
change
scribed under »Editing entries«.
Or...
To delete an existing entry, press the softkey under »del« and proceed as de-
del
scribed under »Deleting entries«.
Or...
Press the softkey under »
An »X« is shown after »No.:«.
An »C« is shown after »No.:«.
« or » « to scroll up and down in this menu.
48
, «.