Swisscom Top A47 ISDN Operating Instructions Manual page 40

Telephoning
To reject the call:
Press the softkey under » « until the second line shows »reject«.
Press the softkey under »reject«. The incoming call is rejected and the caller
reject
hears the busy signal.
Or...
To forward the call:
Press the softkey under »forward«. The display shows »No:« with the cursor
forward
and underneath »ok«.
Enter the number with area code to which the call is to be forwarded.
Or...
To forward the call to a number stored in the phonebook.
Press the softkey under »
Press the softkey button under »
played.
Press the softkey under »ok«. The call is forwarded to the specified number.
ok
Initiating a second call, enquiry call
During a call you wish to call another subscriber, for example to ask a question or switch be-
tween calls. Inform your call partner that he will hear nothing during the time required for you
to make the enquiry call, even if he is still connected.
Press the R button. The active call is put on hold and the display shows
»Dial:_«. The call partner hears nothing.
Enter the subscriber's number with area code. Conduct your enquiry call.
Or...
To forward the call to a number stored in the phonebook.
Press the softkey under »
Press the softkey button under »
played.
Press the softkey under »ok«. Conduct your enquiry call.
ok
You can terminate the second call, see »Terminating calls«, or switch between both calls,
see »Switching between calls«.
«. The first entry in the phonebook is displayed.
« or » « until the relevant number is dis-
«. The first entry is displayed.
« or » « until the relevant number is dis-
36