How To Proceed - Swisscom Top A47 ISDN Operating Instructions Manual

Introduction
Pictograms for operation
In general, the operating steps are accompanied by the buttons you need to activate or the sym-
bol under which the softkey needs to be pressed. For procedures which do not require buttons
or where the button covers several functions, the following pictograms are used:
This symbol stands for any keypad entry.
This symbol indicates that you should lift the handset.
This symbol indicates that you should replace the handset.
This symbol indicates that you should press the softkey under the function
shown in the second line of the display.
Or... This comment appears in the button activation column to indicate alternatives
for operation.
...Continue This appears in the left button margin after an alternative action to indicate
that the procedure should be continued from this point.

How to proceed

Read the chapter »Startup« first.
If you plan to use the telephone in conjunction with a PBX, please refer to the Chapter »PBX
Operation«.
You can then find the procedure/function in the contents or key words list. Go to the relevant
page and perform the operating steps described.
If you encounter problems, press the EXIT button briefly to go back one step in the menu or
hold the EXIT button down longer to abort the function. Repeat the step again or refer to the
chapter »Troubleshooting«.
Now you can enjoy getting to know your telephone!
6