Listening By Loudspeaker; Setting The Volume - Swisscom Top A47 ISDN Operating Instructions Manual

Telephoning
Switching a call from handset to speakerphone
You are conducting a call on the handset but want to switch to speakerphone mode so that
others in the room can listen in and take part.
Press the loudspeaker button and hold down.
Replace the handset and release the loudspeaker button. You can now con-
tinue in speakerphone mode.
/ To terminate the call, press the loudspeaker button or the softkey under
terminate
»terminate«.
Switching a call from speakerphone to handset
You are conducting a call on the speakerphone but want to switch to the handset so that oth-
ers in the room cannot listen in and take part.
Lift the handset. This immediately deactivates the microphone and loudspeaker.
Continue your call
Replace the handset to terminate the call.

Listening by loudspeaker

Unlike the speakerphone, the microphone is switched off for listening by loudspeaker. Others in
the room can listen in to the call but the person you are calling cannot hear them.
You are talking on the handset and want others in the room to listen in.
Press the loudspeaker button to activate the loudspeaker.
Press the loudspeaker button again to deactivate the loudspeaker.
Replace the handset to terminate the call.

Setting the volume

You can adjust the handset and loudspeaker volumes.
Press the plus button. The volume is increased each time you press the button.
Press the minus button. The volume is decreased each time you press the but-
ton.
Press the softkey under »ok«. The volume setting is saved and used for all sub-
ok
sequent calls.
If you do not confirm the volume setting by pressing »ok«, the setting is only valid for the
current call.
28