Speed Dialling; Provider Selection - Swisscom Top A47 ISDN Operating Instructions Manual

Telephoning

Speed dialling

For speed dialling, the relevant speed dial button must be programmed with a
telephone number or a function/service. See »Programming speed dial but-
tons«.
Six speed dial buttons are available for storing 12 frequently used numbers or
functions/services. By pressing the relevant button once or twice, you can auto-
matically dial the numbers or functions/services stored under this button.
Press the button once to display the first stored number or function/service.
Press twice to display the second stored number or function/service.
Lift the handset. The telephone automatically dials the number. Wait for the
connection and make your call.
Replace the handset to terminate the call.
For handsfree (speakerphone) operation, press the loudspeaker button instead of lifting
the handset. Press the loudspeaker button again to terminate the call.
Your Top A47 ISDN
(F51).

Provider selection

You can also telephone via another provider if you subscribe to their service. You have the fol-
lowing options for automatic provider selection:
– Provider prefix dialling
All outgoing calls with this prefix are always routed through this provider (e.g. prefix »0« for
long distance, »00« for abroad, »0033« for France, etc.). If no prefix is entered, all calls not
otherwise programmed are made via this provider.
– Linking phonebook entries with the provider (see »Phonebook«): Outgoing calls with this
number are always routed through this provider. Unlike the above, this option is prioritised.
Automatic provider selection functions only for on-hook dialling or dialling from a list or
the phonebook. It does not function off-hook.
Editing the provider list
If you want to use different providers, you can enter these in the provider list. You may program
up to 6 providers.
Press the menu button repeatedly until the display shows »Installation«.
Press the softkey repeatedly under »
Press the softkey under »change«. The display shows »Provider list«.
change
is delivered with the first speed dial button programmed for »SMS send«
« until the display shows »˙ Provider«.
25