Manual Dialling - Swisscom Top A47 ISDN Operating Instructions Manual

Telephoning

Manual dialling

If only one user is assigned to your Top A47
no need to press the user button before making a call.
Direct dialling (dialling off-hook)
Select the user.
Lift the handset.
Enter the number with area code. The telephone immediately begins dialling.
Wait for the connection and make your call.
Replace the handset to terminate the call.
Dialling preparation (on-hook dialling)
Select the user.
Enter the number with area code. If you have entered a wrong number, see in-
structions below.
Lift the handset. The telephone dials the number entered. Wait for the connec-
tion and make your call.
Replace the handset to terminate the call.
For both dialling modes: If you make a call while a user code other than your own is dis-
played, the call is made with the displayed user's attributes and at his cost.
For both dialling modes: For handsfree (speakerphone) operation, press the loud-
speaker button instead of lifting the handset. Press the loudspeaker button again to ter-
minate the call.
On-hook dialling only: If you have entered a number incorrectly, press the minus button
until the cursor reaches the error. Press the softkey under »del« to delete the number.
Make your correction. Use the plus button to go to the end of your entry.
ISDN or if your code is already displayed, there is
16