Swisscom Top A47 ISDN Operating Instructions Manual page 62

Additional settings
Functions list
F01 Manual rejection of incoming calls
F02 xx..xx Send DTMF
F03 xx..xx Send keypad
F04 xx Park/fetch active call via Code xx
F05 MCID
F06 Three-party conference
F07 Connect
F08 Microphone off (Mic Mute) and on
F11 xx..xx Direct dial
F21 xx..xx Unconditional call forwarding to number xx..xx
F22 xx..xx Call forwarding to number xx..xx on no answer
F23 xx..xx Call forwarding to number xx..xx on busy
F25 Activates and deactivates the call filter for the active user
F31 Activate user A
F32 Activate user B
F33 Activate user C
F34 Activate user D
F35 Activate user E
F51 Send SMS (with editing option)
F52 Send SMS directly
You can also save these functions in the phonebook. Follow the same procedure de-
scribed in the chapter »Phonebook« under »Assigning attributes to numbers« but enter a
function instead of an attribute.
Changing the speed dial settings
Press the menu button repeatedly until the display shows »Settings«.
Press the softkey repeatedly under »
Press the softkey under »change«.
change
Press the speed dial button whose setting you want to change once for the first
number or function or twice for the second number or function.
The number or function is displayed. The cursor is positioned under the first
character.
To delete the entire number or function, press the softkey repeatedly under
del
»del« until the number or function is fully deleted.
Enter the function or the new number with area code.
Press the softkey under »ok« to save the entry.
ok
« until the display shows »Speed dial«.
58