Swisscom Classic S112 Manual
  1. Manuals
  2. Brands
  3. Swisscom Manuals
  4. Telephone
  5. Classic S112
  6. Manual

Swisscom Classic S112 Manual

Hide thumbs Also See for Classic S112:
Table of Contents

Advertisement

Quick Links

Classic S112
Handset
INT 1
24.09.04
§§§§INT§§§
11
10
9
8

Safety precautions

Read the user guide and the safety precautions
W
carefully before use. Explain their content and
the potential hazards associated with using the
telephone to your children.
Use only the mains unit supplied.
$
Fit only the approved rechargeable bat-
tery pack! Never use a conventional (non-
rechargeable) battery pack as this could
damage your health and cause injury. Use
the battery pack as directed in this user
guide (page 3).
The operation of medical appliances may
be affected. Be aware of the technical con-
ditions within the particular environment
(e.g. doctor's practice).
The handset may cause an unpleasant hum-
ming noise in hearing aids. Do not hold the
handset against your ear while it is ringing
(incoming call).
1
V
2
15:03
§§Menu
3
4
5
6
7
Base station
Registration/
paging key (page 10)
1 Display in idle status
2 Battery pack charge status
3 Control key (page 4)
4 End call key, On/Off key
5 Message key
Opens calls and message lists.
6 Hash key
Keypad lock on/off (press and hold in idle status)
7 Microphone
8 Key 0
Press and hold: consultation call (Flash)
9 Star key
Ringtones on/off (press and hold in idle status),
dialling pause (press and hold when dialling)
10 T-Net key
11 Talk key
Open last number redial list (press briefly)
Do not set the telephone up in bathrooms
or shower rooms. The handset and base
station are not splashproof (page 12).
Do not use your phone in environments
with a potential explosion hazard
(e.g. auto paint shops).
Ensure that your device is accompanied by
ƒ
this user guide when you give it to others.
Dispose of old batteries and telephone
according to the legal regulations in your
location.
If the keypad lock is activated (page 4) you cannot
even call emergency numbers! Not all of the functions
described in this user guide are available in all coun-
tries.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Classic S112 and is the answer not in the manual?

Questions and answers

Related Manuals for Swisscom Classic S112

Summary of Contents for Swisscom Classic S112

  • Page 1: Safety Precautions

    Classic S112 Handset Base station Registration/ paging key (page 10) INT 1 24.09.04 15:03 §§§§INT§§§ §§Menu 1 Display in idle status 2 Battery pack charge status 3 Control key (page 4) 4 End call key, On/Off key 5 Message key Opens calls and message lists.

  • Page 2: Table Of Contents

    Contents Contents Setting up the telephone for use . . . 3 Step 1: Connecting the base station ..3 Step 2: Setting up the handset ... 3 Step 3: Registering the handset to the base station and charging the battery pack .

  • Page 3: Setting Up The Telephone For Use

    Setting up the telephone for use Setting up the telephone To close the battery compartment, position the cover and press until it snaps home. for use Notes: – Only insert the recommended rechargeable bat- tery pack, i.e. never use a normal battery pack as Step 1: Connecting the base station this could damage your health and cause injury.

  • Page 4: Activating/Deactivating The Handset

    Operating the handset Activating/deactivating the handset Using display functions The current display functions are shown reverse Press and hold the end call key highlighted in the bottom display line (e.g. Edit (confirmation beep). Launch left / right display func- tion. Activating/deactivating the keypad Returning to idle status lock...

  • Page 5: Muting

    Using the T-Net box* In the display, you will see ® , if you have Directory not requested Calling Line Identification, With- , if the caller has withheld CLI or held Withheld Store up to 50 numbers and their correspond- if CLI has not been requested.

  • Page 6: Using T-Net Services

    (as in the directory, page 5) Press and hold the required quick dial key. Delete List (as in the directory, page 6) Sending the directory to another handset Classic S112 Opening lists Requirement: You can use the message key to open the...

  • Page 7: Sms (Text Messages)

    §OK§ (062 210 00 0x) of the SMS centre from The SMS is sent. Swisscom is pre-programmed. (The last digit of the number (10th number) is automatically Note: set to 0!) If an external call interrupts you while writing an SMS,...

  • Page 8: Receiving An Sms

    The SMS is forwarded. SMS that could not be sent because of an error. Adding/selecting numbers from SMS text New SMS are indicated on all Classic S112 À handsets by the icon on the display and an You are reading an SMS.

  • Page 9: Entering/Changing The Sms Centre

    When supplied, the access number possible causes and gives troubleshooting (062 210 00 0x) of the SMS centre from hints. Swisscom is pre-programmed. (The last digit of the number (10th number) is automatically You cannot send messages. set to 0!) 1.

  • Page 10: Registering Handsets

    Using several handsets You can register up to four handsets on your base station. A Classic S112 handset that is not yet registered Looking for a handset ("paging") to a base station is registered automatically. Other handsets must be registered manually.

  • Page 11: Listening In On An External Call

    Base station settings Changing the name of a handset ¤ Announce external call if required. Press the end call key. The call is trans- The names "INT 1", "INT 2" etc. are assigned ferred. automatically at registration. You can change these names.

  • Page 12: Appendix

    Appendix Appendix 3. The base station is not switched on. ¥ Check the base station's mains adapter (page 3). Care "Please Register" flashes on the display. ¥ Register the handset (page 10). ¥ Wipe the base station and handset with a damp Check the base station's mains adapter (page 3).

  • Page 13: Character Set Chart

    Appendix Character set chart Warranty/Maintenance/Repair/ Authorisation Press the required key the number of times indi- cated. Warranty See table of special characters The warranty period is 2 years as of the date of purchase. See table of special characters For warranty repair, the warranty card, filled out and stamped by the place of purchase must be included with the defective device.

  • Page 14: Authorisation And Conformity

    R&TTE directive. Excerpt from the original declaration "We, the manufacturer, declare, that the handset Classic S112 is manufactured according to our Full Quality Assurance System certified by CETECOM ICT Services GmbH with ANNEX V of the R&TTE-Directive 99/5/EC. The presumption of con- formity with the essential requirements regarding Council Directive 99/5/EC is ensured"...

  • Page 15: Menu Tree

    Menu tree Menu tree With the telephone in idle status,press §Menu§ (open menu), scroll to the required function and con- firm with §OK§. Your phone has an extensive range of features. These To return to idle status: press and hold key are offered in the form of menus.

Table of Contents