Callback / Autodial - Swisscom Top A47 ISDN Operating Instructions Manual

Telephoning

Callback / autodial

You call someone and hear the busy signal. This first line of the display shows »Subscriber busy«
and underneath this »callback, autodial, «. Your Top A47
– Automatic redial of this number as soon as the user has replaced the handset.
– Automatic redial after a set time and for a set number of attempts. To make the settings for
autodial, see »Setting autodial«.
Called party is busy:
Press the softkey under »Callback« if you want your telephone to signal you
Callback
when the user is free.
Or...
Autodial Press the softkey under »Autodial« if you wish your telephone to repeat after a
set time.
Replace the handset.
The display shows the symbol » « to indicate active callback.
Callback remains active for approximately 45 minutes. After this it is automatically can-
celled by the exchange.
One MSN can activate several callbacks. Up to 5 callbacks can be activated for all users.
Cancelling callback
If you want to cancel »callback« before the person you were calling is free, proceed as follows:
The display returns to default mode. Press the softkey under » « until the sec-
ond line shows »Callback«.
Press the softkey under »Callback«. The display shows all active callbacks, in-
Callback
cluding those activated by other users.
Press the softkey button under »
Press the softkey under »del« to delete the callback to this number.
del
ISDN offers the following options:
« until the relevant number is displayed.
17