Putting The Engine Into Operation After Extended Out-Of-Service Periods (>3 Months) - MTU MS15027/02E Operating Instuctions

3.2 Putting the engine into operation after extended out-of-service
periods (>3 months)
Preconditions
☑Engine is stopped and starting disabled.
☑MTU Fluids and Lubricants Specifications (A001061/..) are available.
Putting the engine into operation after extended out-of-service-periods (>3
months)
Item
Engine
Engine
Valve gear
Lube oil system
Coolant circuit
Coolant circuit
Engine cabling
Gas supply
Engine management system Check for fault messages.
Starting system
Measure
Depreserve (→ MTU Preservation and Represervation Specifications
A001070/..).
Bar engine manually (→ Page 150).
Standstill ≥ 6 months: Lubricate valve gear (→ Page 166).
Check engine oil level (→ Page 174);
Check oil level in oil storage tank (→ Page 174).
Standstill > 1 year: Change engine coolant (→ Page 179);
Change mixture coolant (→ Page 184)
Check engine coolant level (→ Page 178);
Check mixture coolant level (→ Page 183)
Check plug-in connections (→ Page 187).
The gas shut-off valves with control solenoids are not included in the scope
of supply of the engine. The components are controlled by the engine elec-
tronics.
Check power supply to electric starter.
MS15027/02E 2015-04 | Operation | 37