MTU MS15027/02E Operating Instuctions page 105

1.4540.048 – SPI ADC Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.049 – Sense 5V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.050 – Sense -9V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.051 – Sense 12V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.052 – ADC Test Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.053 – CAN Timing Changed
Yellow alarm. Initiated by TecJet.
Cause
CAN baud rate change detected.
1.4540.054 – Exception Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
1. Check settings.
2. Check cabling.
Corrective action
u Restart TecJet.
MS15027/02E 2015-04 | Troubleshooting | 105