Table of Contents
Advertisement
6.4.5 Cylinder head cover ‒ Installation
Special tools, Material, Spare parts
Designation / Use
Gasket
NOTICE
Contamination of components.
Damage to component!
• Observe manufacturer's instructions.
• Check components for special cleanliness.
Cylinder head cover ‒ Installa-
tion
1.
Clean mounting surface.
2.
Check condition of gasket, replace if dam-
aged.
3.
Position gasket and cylinder head cover (1)
on cylinder head.
4.
Insert screws (2) in cylinder head cover and
tighten them.
Note:
The locking plate must be removed from
the cylinder head cover.
5.
Install spark plug connector (→ Page 160).
170 | Task Description | MS15027/02E 2015-04
Part No.
(→ Spare Parts Catalog)
Qty.
Advertisement
Table of Contents
