Oil Filtration / Cooling - MTU MS15027/02E Operating Instuctions

6.8 Oil Filtration / Cooling

6.8.1 Engine oil filter – Replacement
Preconditions
☑Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Filter wrench
Engine oil
Oil filter
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
WARNING
Oils/oil vapors are combustible/explosive.
Risk of fire and explosion!
• Avoid open flames, electric sparks and ignition sources.
• Do not smoke.
Replacing engine oil filter
1. Remove oil filter using filter wrench.
2. Clean sealing surface of connecting piece.
3. Check condition of new oil filter sealing
ring and coat it with oil.
4. Screw on and tighten new oil filter by hand.
5. Replace other oil filters in the same way.
6. Check oil level (→ Page 174).
(→ Spare Parts Catalog)
MS15027/02E 2015-04 | Task Description | 177
Part No. Qty.
F30379104 1