Introduction Of Monitor No - Panasonic VF200 Instruction Manual

5. Control Status Monitor

5.2 Introduction of Monitor No.

n001 Output frequency
For displaying output frequency of inverter. When the inverter is stopped, "0.0"
is displayed.
n002
Output Current
n003 Output Voltage
Internal DC Voltage
n004
For displaying output current, output voltage and internal DC voltage of inverter.
The indications are just reference values instead of accurate values for
precision measurement.
(If you need accurate values, use other measuring instrument.)
n005 Set Frequency
For displaying set frequency of inverter.
n006 Communication Station No.
For displaying set communication station number.
The communication station No. can be set with "P136: Communication Station
No. Setting".
n007 Operation Times of Timer
For displaying operation times of timer in one cycle during multi-speed
operation of timer, acceleration/deceleration linking operation of timer,
multi-speed operation of pulse input and acceleration and deceleration linking
operation of pulse input. When a cycle starts, the operation times will be
counted up. When each operation ends and the next run command is input, the
counted times will be cleared.
Operation times of timer can be set with "P068: Timer Operation Times".
72