Panasonic VF200 Instruction Manual page 210

■ Example: Mode for one cycle of pulse input operation
* Setting value of "P069: Continuous Operation Mode of Timer" is "0".
Setting value of "P067: Rotation Direction of Timer Operation" is "14".
After the timer runs one cycle for times set with parameter "P068: Continuous
Operation Times of Timer", "tEnd" will be displayed. Then the timer will return
to "0000" (operation status mode) after stop command is input with "tEnd"
displayed.
During pulse input operation, forward/reverse run commands input from
·
operation panel, external control and communication are invalid.
During pulse input operation, the operation will be stopped immediately even
·
in cycle operation when the stop command is input.
Related parameters: P001, P002, P036 to P041, P046 to P052, P061 to P070,
P079 to P086
Appendix Function Parameter List
Setting value
203