Panasonic VF200 Instruction Manual page 256

Appendix Function Parameter List
be set with P001. When acceleration time is too short, overcurrent trip may
occur and tuning operation cannot be performed correctly.
・Automatic tuning sometimes cannot be performed when the inverter is
affected by power supply environment and connected with special-purpose
motor etc. In this case, set parameter P133 and P134 manually.
nd
・For the 2
motor, related parameters are as follows:
nd nd
"P158: The 2 Motor Capacity", "P159: The 2 Motor Pole Number", "P160:
nd nd
The 2 Voltage Compensation Constant" and "P161: The 2 Slip
Compensation Frequency".
・When automatic tuning of motor constant and PID control are set
simultaneously, the latter will take precedence.
Related parameters: P129 to P131, P133, P134, P158 to P161
249