Panasonic VF200 Instruction Manual page 272

·This function still applies even if parameter "P040: SW5 Function Select" is
set to "11: Frequency ▲／▼ setting
acceleration/deceleration will be performed according to
acceleration/deceleration time set with parameter P001 and P002.
■Operation when parameter P154 is set to "2: Operation linked with
frequency setting"
▼button is pressed when the operating frequency is displayed, the
·If ▲/
displayed data will flicker and enter frequency setting status.
·If SET button is pressed, operation will be started according to the new
frequency value applied beforehand and acceleration/deceleration will be
performed.
·Press MODE button with displayed data flickering to return to the previous
status.
Operation
frequency
display status
Related parameters: P001, P002, P005, P008, P040, P154
MODE
Operation frequency
setting status(flickering)
MODE
Appendix Function Parameter List
".
But when P154 is set to "2",
SET
30Hz → 40Hz
Operation
Acceleration
frequency
display status
SET
30Hz → 20Hz
Deceleration
265