Safety Precautions
• Do not connect an AC power supply to output terminals (U, V, W). Failure
to do so may result in injury or fire.
• Make sure that the voltage rating of the product matches with that of
AC power supply. Or it may result in injury and fire.
• Tighten terminal screws to specified torque. Failure to do so may lead to
fire.
3. Operation
• Always close terminal cover before turning ON inlet power . Do not open
the terminal cover while the power is ON. Failure to do so may result
in an electric shock or fire.
• Do not operate the switches or dials with wet hands. Failure to do so may
result in an electric shock.
• Do not touch inverter terminals even when the inverter is stopped while
power ON. Failure to do so may result in an electric shock.
• The STOP button is not designed for emergency stop purposes. Set a
separate button for emergency stop. Failure to do so may result in injury.
• Depending on the start mode and settings of ride-through function, if
operating signal is ON or the power is restored from a power failure, the
inverter may start (or restart) suddenly. Keep away from the unit to avoid
injury.
〔
Design the machine so that it can ensure personal safety even if the
inverter starts suddenly.
• Depending on the setting of start mode function, when reset fault trip
with the operating signal present, the inverter may restart suddenly.
4
Caution
Danger
〕