Panasonic VF200 Instruction Manual page 242

nd
P120
The 2 Change Point Frequency 1
nd
The 2 Change Point Voltage 1
P121
Change point 1 and 2 can be selected in 3-point mode of "P005: V/F Mode".
(It is valid only when parameter P005 is set to "3C".)
■ Parameter P120: The 2
Data setting
range (Hz)
■ Parameter P121: The 2
Point Voltage 1
Data setting
range (%)
■ Parameter P122: The 2
Point Frequency 2
Data setting
range (Hz)
■ Parameter P123: The 2
Data setting
range (%)
・Read "P005: V/F Mode" carefully before setting.
・When set above base frequency, the 2
operate according to the setting value of base frequency.
・When set below the 2
frequency 2 will operate according to the the setting value of the 2
point frequency 1.
・When setting "P117: The 2
and 2 will operate according to the setting value of the 2
are set below the 2
・When set below the 2
2 will operate according to the the setting value of the 2
1.
nd
Change Point Frequency 1
0.5 to 400.0
nd
Change
0 to 100
nd
Change
0.5 to 400.0
nd
Change Point Voltage 2
0 to 100
nd
change point frequency 1, the 2
nd
Torque Boost", the 2
nd
torque boost level.
nd
change point voltage 1, the 2
Appendix Function Parameter List
nd
P122
The 2 Change Point Frequency 2
nd
The 2 Change Point Voltage 2
P123
nd
change point frequency 1 and 2 will
nd
change point voltage 1
nd
nd
nd
nd
change point
nd
change
torque boost if they
change point voltage
change point voltage
235