Panasonic VF200 Instruction Manual page 65

4. Operation Method (Basic Operation)
■ Operating Example ②: Monitoring and setting potentiometer frequency
command before operation
1. Turn on the power.
The display part will be ON immediately after power-on.
(Operation Status Display Mode)
2. Confirm and set operating frequency.
Press button.
Press button to confirm frequency command.
Turn the frequency setting dial
frequency command to 25 Hz.
Press button to set operating frequency.
3. Set rotation direction.
Press button to select forward run.
(Press button to select reverse run.)
4. Start operation.
Press button.The motor starts to run. The value
"25.0" indicates that the motor is running at 25 Hz.
5. Switch forward run to reverse run during operation.
Press button.
6. Start operation.
Press button. The motor gradually decelerates
and starts reverse run operation at 25 Hz again.
clockwise, and set