3. Wiring
3.1 Safety Precautions
2
Make sure that power is turned OFF before starting
wiring.
Failure to do so may result in an electric shock or fire.
Always connect ground wire.
Failure to do so may result in an electric shock or fire.
Wiring work should always be carried out by qualified
electrician.
Failure to do so may result in an electric shock or fire.
Always install the unit before wiring.
Failure to do so may result in an electric shock or injury.
Do not connect an AC power source to output terminals
(U, V, W).
Failure to do so may result in injury or fire.
Make sure that the voltage rating of the product
matches with that of AC power source.
Failure to do so may result in injury or fire.
Tighten the terminal screws to the specified tightening
torque.
Failure to do so may lead to fire.