Basic Operation - Panasonic VF0 Series Instruction Manual

Always close the terminal cover before turning the input power ON.
●
Do not open the terminal cover while the power is ON.
Failure to do so could lead to electric shock.
Do not operate the switches or dials with wet hands.
●
Failure to do so could lead to electric shock.
Do not touch the inverter terminals when the inverter power is ON or even
●
when the inverter is stopped.
Failure to do so could lead to electric shock.
The STOP button is not designed for emergency stop purposes. Prepare a
●
separate emergency stop button.
Failure to do so could lead to injury.
！
The heat sink fins and brake resistor (dedicated option) can reach high
●
temperatures, so do not touch them.
Failure to do so could lead to burns.
The inverter can be easily set to run from low speeds to high speeds. Confirm
●
the tolerable speed range of the motor and machine before starting operation.
Failure to do so could lead to injury.
Prepare holding brakes when required.
●
Failure to do so could lead to injury.
Before turning power ON, check the following points again.
●
1) Check that all wiring is correct.
2) Make sure the inverter rating and power supply voltages match each
3) Make sure no power factor capacitor is connected to the motor, as it can
4) Before starting a trial run, check the set frequency.
Downloaded from www.Manualslib.com

Basic Operation

CAUTION
ATTENTION
Reversed wiring between the power supply and the load, in particular, can
result in damage to the inverter.
other.
damage the inverter.
manuals search engine
22