Multifunction Computer - APRILIA RSV mile Use & Maintenance Book

MULTIFUNCTION COMPUTER

When the ignition key (1) is rotated to posi-
&
tion " " (ON), the following warning lights
come on on the dashboard:
– red line warning light LED "max" (2).
– red engine oil pressure warning light
+
LED ( ) (3), which remains on until the
engine starts.
The tachometer pointer (4) moves to the ma-
ximum rpm, set by the user.
After about three seconds have passed, the
red line warning light LED "max" (2) goes off;
and the tachometer pointer (4) returns to zero.
On the right side of the multifunction display,
efi
the symbol " " (5) is displayed for about
three seconds.
This sequence of displays indicates that the
multifunction computer is operating properly.
After the first 600 mi (1,000 km) and there-
after every 4,650 mi (7,500 km), the word
"SERVICE" (5a) appears on the right dis-
40
use and maintenance RSV mille
12
9
V max
play. When this occurs contact your Lo-
cal aprilia Dealer, who will carry out the
operations indicated in the regular ser-
vice intervals chart, see p. 86 (REGULAR
SERVICE INTERVALS CHART).
To make the word "SERVICE" disap-
pear, press the "LAP" push button (6),
and simultaneously press the push but-
ton A and keeping them depressed for
about 5 seconds.
With the ignition key (1) in position
(ON) the standard settings on the dashbo-
ard are the following:
Right display: Clock (7), coolant tempera-
ture in °C (8).
Left display: Instantaneous speed in MPH
(9), trip 1 (trip odometer) (10), total miles
odometer (11).
Upon installation of the battery or of the
30A main fuses:
– the tachometer pointer (4) makes 12
clockwise clicks, thus checking the ope-
ration of the tachometer itself;
! - !
RSV mille R
AVS MPH km/h
mi
km
10 13a
11
&
" "
5
8
5a
DIAG SERVICE
7
– the instantaneous, maximum and avera-
ge speed function is set in "MPH";
– the coolant temperature is set in °C;
– the digital clock is set to zero;
– the red line is set at 6000 rpm, indicated
by the illumination of the red line war-
ning light LED "max " (red) (2).
NOTE
If necessary, carry out the appro-
priate adjustments.
SEGMENT OPERATION CHECK
Press the push buttons B and C simul-
◆
taneously.
◆
Rotate the ignition key (1) from position
# &
" " (OFF) to position "
All the segments (13) (13a) will remain on
until the push buttons B and C are relea-
sed.
SWITCHING FROM mi TO km (from MPH
to km/h) AND VICEVERSA (LEFT DI-
SPLAY)
V BATT
13
" (ON).