Tiger JKT-S10U Operating Instructions Manual page 37

Steam cap
(Can be disassembled
into two parts. See
p.40 to 41.)
„ Parts to wash when dirty
Center
sensor
Open/lock
button
Power cord and plug
Note
● Always keep the inner pot and lid clean to prevent corrosion and odors.
● Do not clean the rice cooker or its parts with thinner, cleanser, bleach, disposable cloth, metal spatulas,
nylon scouring sponges or the like.
● Always clean each part separately.
These parts can be washed under running water.
1
Clean with a sponge using tap or lukewarm water.
2
Wipe off water with a dry cloth and completely dry
all parts.
Note
● Do not wash parts in the following manners as they can
cause those parts to become deformed.
Lid
• Washing with hot water
• Soaking
• Washing the hot inner pot with running water immediately
after cooking rice
● Always wash the steam cap after cooking with grains
(amaranths, etc.). The steam cap may clog and cause
problems, like preventing the lid from opening, resulting in
improperly cooked food.
Inside and outside the rice cooker
Wet a towel or cloth, wring out excess water, and wipe.
Heating
plate
Center sensor
Upper
Remove burned rice and any other adhering grains of rice.
casing
If adhering objects are hard to remove, use commercially
Power cord
available sandpaper (around #320), then wet a towel or cloth,
wring out excess water, and wipe.
Around the upper casing and open/lock button
Remove any adhering grains of rice, etc.
Power plug
Note
● Do not allow water to get inside the rice cooker unit.
● Do not immerse the power cord in or splash it with water.
Doing so may result in short-circuiting or electric shock.
Wipe with a dry cloth.
37