Tiger JKT-S10U Operating Instructions Manual page 12

Operation panel
Display
Displays the symbol (menu
cursor) and the present time, etc.
[Cancel] key
Press to cancel the Keep
Warm function or to cancel
the current operation.
[Keep Warm] key
Used to keep the rice warm.
Keep Warm lamp
Lit when the Keep Warm
function is on.
[ ] [ ] (Menu) key
Press to select the desired
cooking menu.
The reliefs (
„ Checking the accessories
Spatula
The spatula can be
inserted into this holder.
Measuring cup
About 1 cup (0.18 L),
about 5.29 oz (150 g)
„ Sounds emitted by the rice cooker
The following sounds coming from the rice cooker
during cooking, reheating, or when the Keep Warm
function is on is normal and does not indicate a
problem:
• Humming (This is the sound of the rotating fan.)
• Buzzing or twittering (This is the sound of IH
operation.)
12
) on the [Start/Rinse-free] and [Cancel] keys are to aid persons with a visual impairment.
Ladle
Cooking plate
COOKBOOK
„ Checking the present time
The time is displayed in a 12-hour format. It should
be adjusted if the correct time is not displayed.
(See p.48.)
„ The lithium battery
The rice cooker has a built-in lithium battery that
stores the present time and the preset timer settings
even with the power plug disconnected.
• This lithium battery has a four-to-five-year life
expectancy with the power plug disconnected.
• If the lithium battery runs out, "0:00" will blink on
the display when the power cord is plugged back
in. Normal cooking is still possible, but the present
time, preset timer settings, and elapsed Keep
Warm time will no longer be stored in memory
when the power plug is disconnected.
Note
● Do not attempt to replace the lithium battery
yourself.
To replace the battery, contact the place of
purchase.
Start lamp
Lit or blinks during
cooking, etc.
[Start/Rinse-free] key
Press to start cooking,
etc.
[Timer] key
Press to select the
desired Timer setting.
Timer lamp
Lit or blinks when the
Timer function is set.
[Hour] and [Min] keys
Use to set the present
time and the time under
the Timer function.