Line Monitor; Ring Tone Volume; Line Type - Fuji Xerox DocuPrint M215 b User Manual

• Auto Ans. TEL/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after the external telephone
receives an incoming call. The interval can be specified within the range of 0 to 255 seconds. The
default is six seconds.
• Auto Ans. Ans/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after the external answering
machine receives an incoming call. The interval can be specified within the range of 0 to 255 seconds.
The default is 21 seconds.

• Line Monitor

Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal
speaker until a connection is made.
Values:
Off
Min
Middle*
Max

• Ring Tone Volume

Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Ans Select is set to TEL/FAX Mode.
Values:
Off
Min
Middle
Max*

• Line Type

Purpose:
To select the line type.
Values:
PSTN*
PBX
345 Using the Operator Panel Menus and Keypad
Turns off the volume of the line monitor.
Sets the volume of the line monitor.
Turns off the volume of the ring tone.
Sets the volume of the ring tone.
Sets the line type to PSTN.
Sets the line type to PBX.