Wall Or Ceiling Mounting; Installation Tips And Warnings - Lorex LNC216 SERIES Instruction Manual

Wireless network camera
Hide thumbs Also See for LNC216 SERIES:
Table of Contents

Advertisement

13. WALL OR CEILING MOUNTING

13.1 INSTALLATION TIPS AND WARNINGS

• Camera is rated for indoor use only. Do not install in wet or humid areas.
• MAKE SURE to run all power adapter and network cables at least 3ft / 1m away from
cribs, bassinets, play yards, and other safe sleep environments for infants.
• Do not point the camera out of a window. The camera will not be able to see at
nighttime due to reflection from the Infrared LED.
• Temporarily connect the camera and test it before permanent installation.
• If using the camera with a wireless network, set up the camera's wireless connection
before permanent installation.
• Make sure that power adapter cable and ethernet cable (if connecting the camera
using ethernet) are long enough to reach the installation location.
13.2 INSTALLATION
1. Use the camera mounting stand to mark holes for the mounting screws. If you are
installing the camera in the ceiling, the screw holes should face the same direction
that you would like the camera to point.
2. Drill holes for the mounting screws. If installing in drywall, it is recommended to use
the included drywall anchors.
Wall or Ceiling Mounting
193

Advertisement

Table of Contents
loading

Table of Contents