Checking For Updates At Scanner Startup; Requesting E-Mail Notification When A New Update Is Available - Fujitsu iScanner fi-6010N Operator's Manual

■ Checking for Updates at Scanner Startup

You can set the function for automatically checking for updates each time the scanner is started.
1. Select the [Maintenance] tab on the top menu.
2. Select the [System Update] tab on the left side menu.
The [System Update] window appears.
3. Select the [Check for updates at scanner startup.] check box.
When a new update is available, update information is output in the system log.

■ Requesting e-Mail Notification When a New Update is Available

The administrator can set to receive an e-mail notification if a new update is released.
1. Select the [Maintenance] tab on the top menu.
2. Select the [System Update] tab on the left side menu.
The [System Update] window appears.
3. Select the [Check for updates at scanner startup.] check box.
4. Select the [Request e-mail notification when a new update is released] check box.
When a new update is released, an e-mail entitled "An event has been detected in net-
work scanner "XXXXXXXXXX". "(XXXXXXXXXX indicates the scanner name) is sent to
the e-mail address that is set in the [Alert Notification] window. For details about the e-
mail address settings for alert notification, refer to
Alert Notifications" (page
4.10 Using the Maintenance Menus
"4.7.16 Setting the Destination for
155).
fi-6010N Network Scanner Operator's Guide
4
185