Clutch; Installation Instructions - Porsche 2015 911 GT3 Cup Technical Manual

Powertrain
2.2.1.1
1 Clutch disk
2 Intermediate plates
3 Pressure plate
4 Housing
A Wings of sintered disks
B Hub gear teeth
C Clutch housing
911 GT3 Cup (991)
42
2.2
A Sachs three-disk sintered metal clutch is used in the 911 GT3 Cup (991). The
clutch has been designed particularly for the loads in motor sports and combines
high performance and temperature durability with reduced weight and low moment of
inertia.
2.2.1
NOTE
2.2.1
Make sure that the wings of the multiple-disk clutch sintered disks (1) are stacked
and aligned (A) if possible. Lightly grease the gear teeth of the hub (B) and move the
clutch disks back and forth on the connecting shaft gear teeth until the hub moves
smoothly on the shaft. If required, remove excess grease.
NOTE
MY 2015

Clutch

Do not drive the vehicle with slipping clutch. This will
cause excessive wear or overheating (maneuvering,
loading and unloading, etc.).

Installation instructions

No grease should get on the clutch linings.
Version: 16.12.2014