Powertrain
2.9.10.1
2.9.10.2
911 GT3 Cup (991)
106
2.9.10
The needle bearing sleeve (2) must be assembled first during reconstruction. Heat
the reverse idler gear (3) to 130° (266 F) C for 30 minutes and press in the needle
bearing sleeve with tool no. 32
WARNING
Secure the needle bearing sleeve (2) with the locking ring (1)
Insert reverse idler gear (3) with bearing spindle (4) and shift fork (Figure 2.9.9.2);
the gearshift shaft must be in the neutral position to allow sufficient space for
inserting
MY 2015
Reverse idler gear
Heat-resistant gloves must be worn for any work with
hot items because of the risk of burning.
Version: 16.12.2014