Chassis
911 GT3 Cup (991)
142
3.2.6
The adjustable double blade-type anti-roll bar on the front axle can be adjusted in
seven positions each on both ends, any position resulting in a 15° change of the
bending lever. Maximum stiffness is achieved when the bending lever is arranged
parallel to the anti-roll bar link. Minimum stiffness is achieved when the bending lever
is at a 90° angle to the anti-roll bar link.
3.2.6.1
List of tightening torques front axle anti roll bar
Item
2
8
9
12
13
15
19
NOTE
MY 2015
Front axle anti-roll bar
Dimensions
Tightening torque in Nm/Comments
M6
10 Nm (7 ft-lb)
M8 x 18
Set 0.25mm (0.0098 inch) gap
M4 x 10
3 Nm (2,2 ft-lb)
M8
10 Nm (7 ft-lb)
M8
10 Nm (7 ft-lb)
M6
13 Nm (10 ft-lb)
M10
65 Nm (48 ft-lb)
An asymmetric adjustment (different blade position
left/right) of the anti-roll bar will result in different
driving behaviors in left or right turns.
Version: 16.12.2014