Pressing in gear housing bearings and bushings
After the studs are inserted, the gear housing has to set in an oven for approx. 40
minutes at 130°C (266 F). The heat is also required for the next work step (inserting
the bearings).
All bearings must be inserted quickly before the housing has cooled off. To ensure
the proper seat of the bearings, all bearings must be tapped with an appropriate tool
after the housing has cooled off.
WARNING
Labels of outer and inner bearing rings generally point in the direction of the pressing
tools during the pressing in process!
Gearbox bleeding bushing
Porsche spare part No.:
02A.301.473
Adhesive:
Loctite 638
Press in up to the limit
Drive shaft cylinder roll bearing (2)
Dimensions:
34x62x17
Porsche spare part No.:
991.302.283.9A
Tool:
No. 1
Version: 16.12.2014
Heat-resistant gloves must be worn for any work with
hot items because of the risk of burning.
Powertrain
2.9.2.6
911 GT3 Cup (991)
MY 2015
89