Bodywork
4.16.1.11
4.16.1.12
911 GT3 Cup (991)
232
Make sure that the threaded bushing (1) is screwed completely on the inserter (2) –
arrows
•
•
NOTE
MY 2015
Insert the threaded bushing (1) completely with the inserter (2)
Briefly heat the thread insert with a WE1119 hot air blower, Leister-
Electron/V.A.G. 1416. Time: 2 minutes, temperature: 80 °C (176 °F).
Alternatively, do not screw the repaired thread for approx. 3-4 hours.
The heating or waiting time is required to prevent the
thread insert from turning when screwing in the bolt.
Version: 16.12.2014