Locking Sleeve - Porsche 2015 911 GT3 Cup Technical Manual

2.9.11

Locking sleeve

Abutment assembly:
Insert the lever (1) into bearing spindle abutment (4) Porsche spare part No.:
991.303.493.9A
Press in bushing (2) Porsche spare part No.: 991.303.497.9A
Insert the compression spring (3) between housing and lever
The bushing (2) must be flush with the housing (4)
Tension the lever with a slot screwdriver and insert the locking sleeve in the gearbox
housing
Put on Simmonds nuts (3) and tighten with 10 Nm (7.4 ft-lb)
Put on the screw (1) with adhesive Loctite 243 and tighten with 25 Nm (18.4 ft-lb)
Tighten Simmonds nut M8 (2) with 25 Nm (18.4 ft-lb)
Version: 16.12.2014
Powertrain
2.9.11.1
2.9.11.2
2.9.11.3
911 GT3 Cup (991)
MY 2015
107