Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Engine
911 GT3 Cup (991)
28
4. Slide the new crankshaft seal (1) on the crankshaft flange (mounting position:
steel disk towards belt side)
1.6.4.7
5. Slide the fitting tool (see 1.) on the crankshaft flange and screw in hexagon bolt
(3) (wrench width SW17)
6. Tighten hexagon nut (4) until spacer ring (2) fits snugly on the crankshaft flange
1.6.4.8
7. Leave the tool mounted for approx. two minutes so that the sealing ring can
assume its correct position
8. Untighten hexagon bolt (4), unscrew hexagon bolt (3) and remove the tool
9. Remove the protective cap from the crankshaft flange
MY 2015

Version: 16.12.2014