Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Sawing template, left
The three threaded holes (1) are used as fixing point.
Transfer the saw line (1) on the template's front end onto the carrier from the top to
the bottom and align centrally to the rivet hole.
The saw cut is described for the right carrier frame.
The distance from the rear end to the saw line is 511 mm (20.12") (measure from
inner side of the carrier).
NOTE

Version: 16.12.2014

The external saw cut only cuts through the outer sheet.
Bodywork
4.15.1.9
4.15.1.10
4.15.1.11
911 GT3 Cup (991)
MY 2015
209