Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Bodywork
911 GT3 Cup (991)
212
Mounting the new part
The bottom cross member and the rivets at the upper end next to the strut dome are
used for positioning.
All surfaces that are riveted have also to be bonded with two-component glue.
Place and rivet the blind rivets connecting the new part to the body.
NOTE
The riveting points are shown below
4.15.1.18
MY 2015
Make sure that two different rivet lengths are available.
Rivet connections through two sheets:
short rivets 3.0-6.5
Rivet connections through three sheets:
long rivets 5.0-8.5

Version: 16.12.2014