Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Bodywork
4.11.4.2
4.11.4.3
911 GT3 Cup (991)
196
NOTE
2. Apply glue on the windshield using the double cartridge gun VAS 5237.
•
NOTE
3. Install the windshield in the body.
•
•
•
MY 2015
When applying the glue material, make sure that the
adhesive bead overlaps by approx. 30 mm (1.2") at the
beginning and end.
Use the glue gun and apply two-component glue on the windshield along
the pre-coating or on the primer in form of a triangular adhesive bead with
dimension (X) application height: 15 mm (0.6").
Two persons are required to insert position and fix the
windshield!
Place the suction lifter on the windshield.
Insert the windshield into the window cutout.
Position the windshield at the bottom edge (arrows A) and tilt it down into
the frame (arrow B)

Version: 16.12.2014