Powertrain
2.8.9.1
2.8.9.2
2.8.9.3
2.8.9.4
911 GT3 Cup (991)
70
2.8.9
Loosen the differential lid catch evenly using a crisscross pattern and remove it
Remove the differential lid with the assembly lever (Figure 2.8.9.1)
Remove the locking ring of the cylinder roll bearing differential lid
Heat the differential lid at 130 °C (266 F) for 30 minutes
Remove the bearing (2) without applying great force
Remove the differential from the gearbox housing (Figure 2.8.9.3)
Loosen the differential lid screws evenly using a crisscross pattern
Screw two panel pullers on the differential lid and separate the lid from the housing
NOTE
MY 2015
Differential removal
The inner threads in the differential lid must be cut with
a die and degreased before the reconstruction.
Version: 16.12.2014