Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Cross shaft design
The cross shaft (1), offset by 90°, is located behind the pinion shaft and is used for
changing the direction of the torque. The crown gear of the cross shaft is driven by
the bevel gear of the pinion shaft. The torque is transmitted by means of the
opposing spur gear teeth to the limited-slip differential located above it.
1
2.3.3.5

Version: 16.12.2014

Powertrain
911 GT3 Cup (991)
MY 2015
49