Windows; Installing And Removing The Windshield - Porsche 2015 911 GT3 Cup Technical Manual

4.11

Windows

The front window is made of laminated safety glass and glued to the body; the rear
side windows and rear windows are made of PC (polycarbonate). The rear side
windows are removable and are clipped into the frame by means of ball heads. The
rear window is glued. When replacing the rear window, the new part's adhesive
surface should be roughened.
4.11.1

Installing and removing the windshield

Tools
Designation
Electric special cutter – Fein
Suction lifter – Stahlwille
Double cartridge gun VAS 5237
Cut system for glued panes - VAS 6452
The tools can be ordered at your Porsche Center. As an alternative for the cut
system VAS 6452 (4.11.1.1), KSA Toolsystems offer a cutting device "Single Cut
System" (4.11.1.2). The two systems differ. VAS 5237 uses a wire for cutting, the
Single Cut System a polyethylene cord. The manual describes cutting with the VAS
6452, but the procedure with the KSA system is identical.
Consumables
Designation Item No.
Gluing set 000 043 301 14
Cord 000 043 300 96
Wire for (VAS) 000 043 303 32
Version: 16.12.2014
Item No.
ASE 481 202 00 000
ASE 481 161 00 000
ASE 416 161 00 000
ASE 481 261 01 000
Bodywork
4.11.1.1
4.11.1.2
911 GT3 Cup (991)
MY 2015
189