Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

NOTE
5. Insert the cutting wire into the window gap, WE1480 cutting system for glued
windows - VAS 6452.
• Wet the windshield sealing (1) with soapy water on the entire
circumference.
• Pull the cutting wire (2) into the gap between windshield and body (note the
arrows) on the entire circumference.
• Clamp the free end of the cutting wire to the wiper mechanics. Introduce
the cutting wire.
6. Pull the cutting wire through to the inside.
• Cut adhesive bead from the inside to the outside using piercing awl (1)
arrow A.
Insert cutting wire (2) into the piercing awl and pull it into the interior arrow
•
B.
• Pull the cutting wire through to the inside. Length: Insert 1 m (3'3.4")
cutting wire.
NOTE

Version: 16.12.2014

The cutting cord has to be below the window edge, as
otherwise the seal will be damaged.
It is recommended to clean the windshield before
installation in order to ensure optimum adhesion of the
suction cups.
Bodywork
4.11.1.3
4.11.1.4
911 GT3 Cup (991)
MY 2015
191