2.9.20
Gear housing assembly
Powertrain
Insert the greased top O ring of the shift rod into the groove (Figure 2.9.20.1)
2.9.20.1
Grease the O ring (1) and insert it in the gearbox housing (Figure 2.9.20.2)
2.9.20.2
The cutted gear housing can be replaced with the gear housing after all settings have
been made. Drive shaft and pinion shaft are already mounted in this section.
Put on the housing and tighten evenly (25 Nm (18.4 ft-lb))
2.9.20.3
911 GT3 Cup (991)
Version: 16.12.2014
126
MY 2015