Central release mechanism
NOTE
Also be sure to remove oil residues from your hands and the working
•
environment before handling the seal (this also applies to engine oil and
other oils).
•
According to the manufacturer, the seal is compatible with hydraulic fluids
with DOT4 and DOT5.1 specifications.
7.3.3
Paddle shift
Small Service:
•
Once p.a.
•
Max. 10.000 km
•
Max. 10 h compressor run time
Big Service:
•
Every two years
•
Max 20.000 km
•
Max. 20 h compressor run time
Version: 16.12.2014
When handling the central release mechanism seal, be
sure to avoid any contact with transmission oil.
Otherwise, the seal may swell, which, in the worst
case, may cause a loss of function. Only use the Sachs
special tool to fit the seal.
Maintenance
1
2 5
4
7.3.2.2
1
Thrust bearing
2
Piston
3
Housing
4
Seal
5
Dust protection ring
911 GT3 Cup (991)
MY 2015
3
303