Chassis
911 GT3 Cup (991)
166
3.8.1
In the basic position, the potentiometer should be in position "zero". The distance
between the push rod and master cylinders is symmetrical and amounts to 11.8 mm
(0.465 inches). In the default setting, the balance beam should be perpendicular to
the push rod at a pedal load of 40 bar (580 psi).
If the adjusting wheel potentiometer is in "zero" position, a voltage of 2.5 V can be
measured. When setting the balance beam, a calibration should also be carried out in
the display; i.e. with the balance beam in "zero" position, the display should also be
calibrated so that "zero" appears in the display.
Front
Axle
3.8.1.1
MY 2015
Balance beam basic setting
11.8 mm
Driving direction
11.8 mm
Rear
Axle
Version: 16.12.2014