Air Jack System - Porsche 2015 911 GT3 Cup Technical Manual

Bodywork
911 GT3 Cup (991)
186
4.8
The air jack system is supplied by Krontec. The vehicle has three lifting jacks, one in
the middle of the front section and two in the area of the B-pillars, firmly attached to
the body. The lifting jacks are not adjustable for height and must not be adjusted to a
ride height change. The compressed air supply valve is installed in the area of the
passenger's B-pillar (rear side window). The maximum working pressure is about 35-
38 bar (508-551 psi).
Important notes
WARNING
WARNING
NOTE
MY 2015

Air jack system

Never work below the vehicle lifted with the air jack
system without protecting it against accidental
lowering.
Never open the air jack. The system is under pressure
even in the retracted position!
To prevent damage to the air jack end stops, never let
the air jacks extend freely (i.e. without vehicle load).
Version: 16.12.2014